Decal Directions and Care
Directions on applying your decal!
1. Clean the area you wish to place the decal with rubbing alcohol thoroughly. Let dry.
2. Take a credit card and rub in a downward direction to make sure vinyl is completely adhered to the clear transfer tape.
3. Peel back the white backing. Decal should be on the clear packing tape only at this point.
4a. If you need some wiggle room spray area very lightly with windex. this will allow you to move it slightly. Don't go overboard! You don't need much.
4b. Carefully place the decal in desired place. You get 1 shot to do this. Please take your time and be careful!
5. Take credit card and gently rub decal onto surface. go in a single motion, pulling down and side to side. Never push!
6. Work diligently to get all air bubbles out. Once you are satisfied peel back transfer tape slowly from one corner working your way to the opposite corner.
7. If you missed an air bubble first try rubbing to remove it. If you cant get it out you can poke it with a pin & work it down with your fingers.
8. Enjoy your new decal!
***Decals are not dishwasher safe. If applying to anything that will need washing please hand wash only!
***Allow decal to "rest" unused for 48 hours for best results.